Toolstoday

Using a drill guide to ensure I get perfectly straight holes and insert these threaded inserts straight for the legs on this table. The guide is extremely easy to use and allows me to get drill press quality straight holes in the middle of this large table top. As an added bonus, I also used the same guide to ensure the threaded inserts went in straight as well. This setup made this task quick and easy while maintaining the accuracy I needed! Be sure to check out the tools used available from @toolstoday! -- Woodpeckers Auto-Line Drill Guide, item no. WP-ALDG-21 Woodpeckers Mini in-DEXABLE Double Square, item no. WP-MDSQ-21 Pica Dry Fine Pencil, item no. PC-3030/SB Wera 3/8" Drive Zyklop Comfort Ratchet, item no. 05005540001

What do you think of how this project turned out? Making a cabinet with the precision of a CNC and the Festool Domino connection system, this flat pack melamine cabinet went together quickly and easily! Cutting everything on the CNC allowed me to design and cut out the mounting holes for all of the cabinet hardware speeding up the assembly process a ton! I'm really happy with how this cabinet turned out. Be sure to check out all of the tools used in this video, listed below, available from @toolstoday! -- Amana Tool 3/8" Downcut bit, item no. 46203-K Amana Tool ER32 Adjustable Torque Wrench, item no. ATW-32 Amana Tool 2mm Solid Carbide Drill bit, item no. 363002 Amana Tool 1/4" Downcut bit, item no. 46202-K Amana Tool 5mm Solid Carbide Drill bit, item no. 363005 Amana Tool 3/8" Compression bit, item no. 46172-K CAMaster Panther PT-408 CNC machine Black Box Hurricane Vacuum, item no. BBV-HVP-2 Festool Edge Bander Conturo KA 65, item no. FS-576577 Festool Edge Router MFK 700, item no. FS-576239 Festool Edge Trimming Cutter, item no. FS-491666 Wera Multicolor Metric L-Key Set, item no. 05073593001 Woodpeckers Mini Square, item no. WP-MINISQUARE Festool CT 26 HEPA Dust Extractor, item no. FS-577083 Festool MFT/3 Basic, item no. FS-500608 Festool MW 1000 Extension, item no. FS-203457 Festool Quick Clamp, item no. FS-491594 Festool Carbide Scraper ZK HW 45/45, item no. FS-499749 Festool Domino DF 500, item no. FS-576423 Festool Domino Connector Range, item no. FS-576797 Festool Side Clamping Elements MFT-SP, item no. FS-488030 Amana Tool 55162 Countersink Bit for Festool CENTROTEC system, item no. 55162 Festool CXS 18 Drill, item no FS-576887 Wera Kraftform Kompakt 62, item no. 05059297001

In real time, it only took 6 minutes and 20 seconds to cut this entire sheet of melamine cabinet parts, I'm blown away! 🤯 The CAMaster Panther is a beast and the parts were held down perfectly with the Black Box Hurricane vac.  All tools used in the video are available from @toolstoday, be sure to check them out on our website! -- CAMaster Panther PT-408 CNC machine Black Box Hurricane Vacuum, item no. BBV-HVP-2 Amana Tool 3/8" Downcut bit, item no. 46203-K Amana Tool 2mm Solid Carbide Drill bit, item no. 363002 Amana Tool 3/8" Compression bit, item no. 46172-K Festool CT 26 Dust Extractor, item no. FS-577083 Festool Floor Cleaning Set, item no. FS-577259 -- 46172-K Compression Bit RPM: 18,000 Feed Rate: 400ipm Plunge Rate: 200ipm Depth of Cut: .76"

Using a variable router jig to pocket for this steel table leg on the back of this cherry table top. I used some setup blocks around the leg equal to the offset from my guide bushing, the 1/2" downcut bit worked perfectly following the variable template, once the majority was cut a corner chisel made for easy squaring of the edges for a perfect fit! Be sure to check out the tools used available from @toolstoday! -- Woodpeckers Variable Router Jig, item no. WP-VRJ-191832 MicroJig MatchFit Clamps, item no. DVC-538K2 Festool OF 1400 Router, item no. FS-576213 Amana Tool 1/2" Spektra downcut bit, item no. 46206-K Festool CT 26 Dust Extractor, item no. FS-577083 Festool Remote Control CT-F I/M Set, item no. FS-202097 Festool Boom Arm, item no. FS-492753 Festool WCR 1000 WorkCenter, item no. FS-577253 Timberline Corner Chisel, item no. 3420

Edge banding, trimming flush and easing over the sharp edges on this melamine door. While you would normally be working on multiple doors and cabinet parts at a single time, I wanted to show you the entire process of trimming out a door from start to finish. The beauty of the tools used here is how easy they are to use and the way they make the process repeatable, getting perfect results every time. While these tools perform great, where they really shine, is when you need to edge band curves. We will have that in an upcoming video, so be on the look out for that! 🔧 All tools used in the video are available from @toolstoday, be sure to check them out on our website! -- Festool Edge Bander Conturo KA 65, item no. FS-576577 Festool Edge Router MFK 700, item no. FS-576239 Festool Edge Trimming Cutter, item no. FS-491666 Festool CT 26 HEPA Dust Extractor, item no. FS-577083 Festool Edge Banding Flush Trimmer, item no. FS-499896 Festool MFT/3 Basic, item no. FS-500608 Festool MW 1000 Extension, item no. FS-203457 Festool Quick Clamp, item no. FS-491594 Festool Carbide Scraper ZK HW 45/45, item no. FS-499749

Cleaning up the pockets on these spoons is simple! Just adjust the stepover on the tool to 5% and set the direction of cut to go with the grain of the wood, providing the cleanest cut possible. This will definitely save a lot of time spent sanding! All tools used are available from @toolstoday, be sure to check them out on our site! -- Amana Tool 3/8" Ball Nose Upcut bit, item no. 46378-K i2R A.24 2'x4' CNC machine Vectric V-Carve Pro Design Software, item no. AVC308-2 -- RPM: 18,000 Feed Rate: 225ipm Plunge Rate: 75ipm Depth Per Pass: .25"

Surfacing a large walnut slab on the CNC machine! I used shims with hot glue to hold the slab in place so we could get this first side flattened, it worked great! The 3 wing insert carbide surfacing bit with DLC inserts flew through the material and left a nice flat surface, extremely impressed at how well the machine cut! All tools used in the video are available on our website and listed below! -- Amana Tool 3 Wing Insert Carbide Surfacing Bit, item no. RC-2255 Amana Tool DLC Inserts, item no. RCK-457-DLC CAMaster Panther PT-408 CNC machine Black Box Hurricane Vacuum, item no. BBV-HVP-2 Festool CT 26 Dust Extractor, item no. FS-577083 -- RPM: 18,000 Feed Rate: 350ipm Plunge Rate: 100ipm Depth of Cut: .1875"

Sanding a walnut slab on the CNC using the new Amana Tool In-Sand 4" CNC Orbital sanding attachment! It's important to make sure that the slab is surfaced flat before using the sander on the wood. The sander is dynamically balanced to limit vibration. It is spring loaded to keep the correct sanding pressure on the pad extending the life of the sandpaper. This tool is a game changer for processing large slabs on a CNC machine and removes a lot of the sanding work needed after surfacing slabs. I was very impressed with how well this worked and removed the lines from surfacing perfectly! I'm using 80 grit paper here. All tools used in the video are available on our website and listed below! -- Amana Tool In-Sand CNC Sanding attachment, item no. 61299 CAMaster Panther PT-408 CNC machine Black Box Hurricane Vacuum, item no. BBV-HVP-2

Well, this is something you don't see every day! Edge banding and trimming an inside radius using the Festool Conturo and MFK 700 router with ease! The edge bander can go down to a 1-15/16" (50mm) inside radius and can go as tight as 1" (25mm) for outside radiuses. The router makes it quick and easy to trim the edge banding flush on those radiuses as well! All tools used in the video are available from @toolstoday, be sure to check them out on our website! -- Festool Edge Bander Conturo KA 65, item no. FS-576577 Festool Edge Router MFK 700, item no. FS-576239 Festool Edge Trimming Cutter, item no. FS-491666 Festool CT 26 HEPA Dust Extractor, item no. FS-577083 Festool Edge Banding Flush Trimmer, item no. FS-499896 Festool MFT/3 Basic, item no. FS-500608 Festool MW 1000 Extension, item no. FS-203457 Festool Quick Clamp, item no. FS-491594 Festool Carbide Scraper ZK HW 45/45, item no. FS-499749

Routing out a pocket for a steel table leg on the back of this cherry table top using some scrap wood. The pattern bit worked perfectly following the template, once the majority was cut a corner chisel made for easy squaring of the edges for a perfect fit! Be sure to check out the tools used available from @toolstoday! -- XFasten Double sided tape, item no. WO-5BMC-7UO9-1 Festool OF 1400 Router, item no. FS-576213 Amana Tool 1/2" diameter pattern bit, item no. 45481 Festool CT 26 Dust Extractor, item no. FS-577083 Festool Remote Control CT-F I/M Set, item no. FS-202097 Festool Boom Arm, item no. FS-492753 Festool WCR 1000 WorkCenter, item no. FS-577253 Timberline Corner Chisel, item no. 3420

Is this the fastest and most accurate way to cutout windows? I certainly think so, plus, it's extremely easy to do! Using the Amana Tool 47104 1/2" diameter flush trim bit, available from @toolstoday, to cut out the siding for windows on the chicken coop. This method worked out great, required no measuring or removing the siding multiple times to mark out and cut the window location. I'll definitely be doing it this way going forward! #ToolTok

Perfect fitting dovetails are made easy with the PantoRouter, now available from @toolstoday. To cut these I used the Amana Tool 45828 1/2" 8° dovetail bit to cut the tails and 46320-K 3/8" upcut bit to cut the pins, both available on our website. What questions do you have about this setup?

Unfortunately, the back side of this table top is full of knot holes, so I filled them with epoxy. I used a bit of a unique setup with the router to be able to quickly remove 95% of the epoxy reducing the amount of sanding needed, speeding up the process! The tools used in this video are available on our website, be sure to check them out there! -- Festool STM 1800 Mobile Saw Table, item no. FS-205183 Pica Visor Multi-Use Marker Red, item no. PC-990/40/SB TotalBoat High Performance Epoxy, item no. 519733 Festool MFK 700 EQ/B-Plus, item no. FS-576244 Festool Lining Base, item no. FS-10010205 Amana Tool Mini Insert Carbide Surfacing Bit, item no. RC-2243 Festool CT 26 Dust Extractor, item no. FS-577083 Festool Boom Arm, item no. FS-492753 Festool Cleaning Kit, item no. FS-577259 -- #woodworking #workshop #woodshop

Precision makes the flat pack assembly process of this cabinet frame an absolute breeze using the Domino connection system! Everything lined up absolutely perfectly on this cabinet frame and after assembly this frame is rock solid, unlike other flat pack connection systems I've used in the past. All tools used are available from @toolstoday and are listed below. -- Festool Domino Connector Range, item no. FS-576797 Festool MFT/3 Basic, item no. FS-500608 Festool Side Clamping Elements MFT-SP, item no. FS-488030

This compact router table is one that will work in any shop environment! I love that the router mount is able to be taken out of the table and becomes a larger, more stable base for your router. This also means that you could put a StabilMax base on another router and swap routers, with different bits in them, into the table without any additional setup work! The ability to clamp the table to the edge of the workbench and still be nice and stable is another awesome addition to this setup! Be sure to check out the tools used available on our website and listed below! -- Woodpeckers StabilMax RT Router Table, item no. WP-SMRT-P Wera Ratcheting Screwdriver 838 Ra-R M. item no. 05051493001 Festool Screw Clamp FSZ 120, item no. FS-489570

Flush trimming and concealing the seam on kitchen island cabinet using the Amana Tool 47160 flush trim v-groove bit, available on our website. This cut very cleanly and requires very little sanding before it's ready for paint. #woodworking